We machine production parts for Textile Machinery customers, from single prototypes through to repeat batches of tens of thousands. Typical work covers spindle housings, yarn guides and roller ends, usually in 6061 or 7075.
What makes Textile Machinery different from general machining is not the geometry — it is the documentation and the failure modes. The parts that come back are the ones where abrasion from fibre is the dominant wear mode was not designed out at the start.
Parts we machine for Textile Machinery
- Spindle housings
- Yarn guides
- Roller ends
- Cam plates
- Needle bars
Materials we run for Textile Machinery
- 6061
- 7075
- Ceramic inserts
- UHMW-PE
- Hard chrome steel
Standards and documentation
- ISO 8115 for bobbins, machine-maker specs
Tell us which standard applies and which documents you need with the shipment. Dimensional reports, material certificates, certificates of conformity and first article inspection reports are all available, and it is much cheaper to agree them before the batch runs than to reconstruct them afterwards.
Where Textile Machinery projects usually go wrong
- Abrasion from fibre is the dominant wear mode
- High-speed rotation demands dynamic balance
Tolerance and finish we hold
| Requirement | Typical capability |
|---|---|
| General tolerance | +/-0.02 mm on spindle bores; Ra 0.2 um on yarn-contact surfaces |
| Surface finish | Ra 0.4 to 3.2 um |
| Material certification | EN 10204 3.1 on request |
| Inspection | Dimensional report, CMM report, FAIR |
| Packaging | VCI and desiccant for steel, individual wrap for cosmetic faces |
Frequently asked questions
Do you have experience with Textile Machinery parts?
Yes. Typical parts we run are spindle housings and yarn guides. We can share the process route and inspection approach for a comparable part before you commit.
Which materials do you recommend for Textile Machinery?
6061, 7075, Ceramic inserts, UHMW-PE. The right choice depends on which of corrosion, weight, strength and cost is the binding constraint, and we will say so plainly rather than quoting the most expensive option.
What documentation do you provide?
A dimensional report and a certificate of conformity as standard. Material certificates, CMM reports, FAIR and PPAP submissions are available when your quality system requires them.
What tolerances do you hold for Textile Machinery parts?
+/-0.02 mm on spindle bores; Ra 0.2 um on yarn-contact surfaces is typical for the industry. Tighter tolerance on individual features is possible and is quoted against the specific feature rather than the whole part.
Related pages
- Industries — the full index for this section.
- CNC Machining for Marine and Offshore Parts
- CNC Machining for Oil and Gas Equipment
- CNC Machining for Food Processing Machinery
- CNC Machining for Agricultural Machinery
- Instant CNC quote
- Tolerance quick reference
- Frequently asked questions
Get a price for your part
Send a STEP file and a drawing with tolerances, material and quantity. We quote within one working day and machine in our own facility in Shenzhen — milling, turning, EDM, grinding and finishing under one roof, no trading middleman.
Start an instant quote or send your drawings directly. English-speaking engineering support, DFM feedback before you commit to a batch.