We machine production parts for Agricultural Machinery customers, from single prototypes through to repeat batches of tens of thousands. Typical work covers gearbox housings, shafts and pins, usually in 1045 or 4140.
What makes Agricultural Machinery different from general machining is not the geometry — it is the documentation and the failure modes. The parts that come back are the ones where dust and grit ingress destroys seals long before metal fails was not designed out at the start.
Parts we machine for Agricultural Machinery
- Gearbox housings
- Shafts
- Pins
- Hitch components
- Seeder plates
Materials we run for Agricultural Machinery
- 1045
- 4140
- Ductile iron
- Hard chrome steel
Standards and documentation
- ISO 4254 for safety, regional homologation
Tell us which standard applies and which documents you need with the shipment. Dimensional reports, material certificates, certificates of conformity and first article inspection reports are all available, and it is much cheaper to agree them before the batch runs than to reconstruct them afterwards.
Where Agricultural Machinery projects usually go wrong
- Dust and grit ingress destroys seals long before metal fails
- Seasonal demand means no schedule flexibility
Tolerance and finish we hold
| Requirement | Typical capability |
|---|---|
| General tolerance | +/-0.1 mm on most parts; H7 on bearing bores |
| Surface finish | Ra 0.4 to 3.2 um |
| Material certification | EN 10204 3.1 on request |
| Inspection | Dimensional report, CMM report, FAIR |
| Packaging | VCI and desiccant for steel, individual wrap for cosmetic faces |
Frequently asked questions
Do you have experience with Agricultural Machinery parts?
Yes. Typical parts we run are gearbox housings and shafts. We can share the process route and inspection approach for a comparable part before you commit.
Which materials do you recommend for Agricultural Machinery?
1045, 4140, Ductile iron, Hard chrome steel. The right choice depends on which of corrosion, weight, strength and cost is the binding constraint, and we will say so plainly rather than quoting the most expensive option.
What documentation do you provide?
A dimensional report and a certificate of conformity as standard. Material certificates, CMM reports, FAIR and PPAP submissions are available when your quality system requires them.
What tolerances do you hold for Agricultural Machinery parts?
+/-0.1 mm on most parts; H7 on bearing bores is typical for the industry. Tighter tolerance on individual features is possible and is quoted against the specific feature rather than the whole part.
Related pages
- Industries — the full index for this section.
- CNC Machining for Telecom and RF Housings
- CNC Machining for Optical and Photonics Hardware
- CNC Machining for Oil and Gas Equipment
- CNC Machining for Dental and Orthodontic Parts
- Instant CNC quote
- Tolerance quick reference
- Frequently asked questions
Get a price for your part
Send a STEP file and a drawing with tolerances, material and quantity. We quote within one working day and machine in our own facility in Shenzhen — milling, turning, EDM, grinding and finishing under one roof, no trading middleman.
Start an instant quote or send your drawings directly. English-speaking engineering support, DFM feedback before you commit to a batch.